Mounting
Thread Size
Torque Ft.-Lbs.
Nut Type
LIGHT TRUCK
10-Hole, 7.25" Hub-Piloted (Ford)
(5.47" Bore)
9/16 - 18 125 - 165 Two piece flange
10-Hole, 7.25" Hub-Piloted (Chevy)
(5.25" Bore) - With Clamping Plate
5/8 - 18 171 - 179 90° cone*
With Clamping Plate
8-Hole, 6.50" I.O.C. (Ford) 9/16 - 18 175 - 200 90° cone
5/8 - 18 175 - 200 90° cone
8-Hole, 6.50" (Chrysler) 9/16 - 18 125 - 165 Two piece flanged
5/8 - 18 275 - 325 One piece flanged
8-Hole, 6.50" Hub-Piloted (Ford)
(4.88" Bore)
9/16 - 18 125 - 165 Two piece flange
5/8 - 18 130 - 170 Two piece flange
8-Hole, 6.50" Stud-Piloted (Ford)
(4.88" Bore) - Single Wheel
9/16 - 18 130 - 150 60° cone
8-Hole, 6.50" Hub-Piloted (Chevy) M14 x 1.5 110 - 120 Two piece flange
8-Hole, 6.50" Hub-Piloted (Chevy)
(4.56" Bore) - With Clamping Plate
9/16 - 18 136 - 144 90° cone*
With Clamping Plate
M14 x 1.5 136 - 144
8-Hole, 6.50" Hub-Piloted (Chevy)
(4.60" Bore)
M14 x 1.5 136 - 144 Two piece flange
8-Hole, 170mm, Hub-Piloted (Ford)
(125.10mm bore)
M14 x 2.0 150 - 160 Two piece flange
8-Hole, 225mm, Hub-Piloted (Ford)
(170.10mm bore)
M14 x 2.0 150 - 160 Two piece flange
6-Hole, 8.75" Stud-Piloted 3/4 - 16 450 - 500 .875" spherical radius
1 - 1/8 - 16 450 - 500 .875" spherical radius
6-Hole, 222.25mm Stud-Piloted
Japanese .866" Nut Type
M20 x 1.5 325 - 400 .866" spherical radius
MEDIUM/HEAVY TRUCK, TRAILER AND BUS
10-Hole, 13 3/16 HD Stud-Piloted 15/16 - 12 750 - 900 1.187" spherical radius
1 - 5/16 - 12 750 - 900 1.187" spherical radius
10-Hole, 335mm Hub-Piloted M22 x 1.5 450 - 500 Two piece flange
10-Hole, 11 1/4" Stud-Piloted 3/4 - 16 450 - 500 .875" spherical radius
1 - 1/8 - 16 450 - 500 .875" spherical radius
10-Hole, 11 1/4" Hub-Piloted
(Bus Mount)
3/4 - 16 300 - 350 Two piece flange
7/8 - 14 350 - 400 Two piece flange
10-Hole, 285.75mm Hub-Piloted M22 x 1.5 450 - 500 Two piece flange
10-Hole, 8.75" Hub-Piloted 11/16 - 16 300 - 400 One piece flanged
10-Hole, 8.75" Stud-Piloted 3/4 - 16 450 - 500 .875" spherical radius
1 - 1/8 - 16 450 - 500 .875" spherical radius
10-Hole, 200mm Hub-Piloted (Ford) M14 x 2.0 150 - 160 Two piece flange
10-Hole, 225mm Hub-Piloted (Ford) M14 x 2.0 150 - 160 Two piece flange
8-Hole, 285mm Stud-Piloted Japanese Check truck manufacturer for torque details
8-Hole, 275mm Hub-Piloted M20 x 1.5 280 - 330 Two piece flange
M22 x 1.5 450 - 500 Two piece flange
Demountable Rims 3/4 - 10 200 - 260 Flat nut

 

* These nuts can only be used with a clamping plate.  Do not use 90° cone nuts against the disc face.  Note: Hub, stud and spoke wheel manufacturers may have different torque requirements.  Consult Accuride Field Engineering at 800-869-2275 if torque recommendations conflict.  Refer to Accuride's Rim/Wheel Safety & Service Manual for information on torque and nut tightening sequence.

 

Original document